Alarm Acknowledge Modules AAM2 Alarm Acknowledge Module
The AAM2 Alarm Acknowledge Module provides a facility to locally annunciate a smoke/CO detector alarm,
Office 2007 Standard Product Key, and for the occupant to acknowledge and clear a untrue fireplace alarm with no the fireplace brigade getting called. The AAM2 has no sounder and is also utilized using a detector mounted in a very sounder base. The AAM2 is normally installed in a single occupancy unit (apartment,
Microsoft Office Standard, flat or single-persons quarters) along with one or even more non-latching smoke/CO hearth detectors. When an alarm is detected the sounder from the detector base and the red LED in the AAM2 operate as well as the occupant has (typically) 30 seconds to acknowledge the alarm. This starts an additional time delay (typically 1-3 minutes), throughout which they need to obvious the smoke in order to avoid calling the fire brigade. If either time delay elapses and smoke is still existing,
Microsoft Office 2010 Product Key, then the hearth panel goes into alarm as well as the brigade is termed. As standard the AAM2 arrives with out a encounter plate, these has to be ordered separately. Two different experience plates are at present available: The AAM2 is compatible together with the MX4428/F4000 and Simplex 4100 FIPs. Refer to LT0304, AAM2 Installation Instructions.
Specifications
Running Voltage 2-28Vdc
Quiescent Present 0μA
LED Present 2-20mA
Operating Temperature -5°C to +45°C
Operating Humidity 10% to 95% R.H (n/cond)
Weight (typical) 100g
Approvals CSIRO FTS-136
Time Limit Panel Programmable
FP0894
The AAM2 can be used together with the FA2317 experience plate for general alarm indication, annunciation and acknowledgement, eg,
Windows 7 Starter Sale, a Nurses Station. The FA2317 experience plate has text labelling Press to Acknowledge Fireplace Alarm. The AAM2 can be wired up to the hearth panel so the LED lights on alarm and an external sounder operates as well. Pressing the button silences the buzzer and turns off the LED.
Part Number
FP0894 Alarm Acknowledge Module AAM2 with FA2317 Faceplate
FP0895
The AAM2 can be used with all the FA2318 face plate to make an Alarm Acknowledgement Module,
Office Professional Plus 2010 X86, as FA2318 contains the additional text information and space for your investigation time to be filled in on-site. The AAM allows the resident of a Sole Occupancy Unit (SOU) or apartment to acknowledge and clear a false fire alarm without having the hearth brigade becoming known as.
Part Number
FP0895 Alarm Acknowledge Module AAM2 with FA2318 Faceplate
ME0420
AAM2 Alarm Acknowledge Module (no sounder) is the basis for the AAM2. It comprises a blank faceplate and backplate with PCB. A faceplate using the required text is added to make up an AAM2 ki. The complete AAM2 unit is ordered as both FP0894 or FP0895.