HOME|PRODUCTS |SERVICES |SOFTWARE |SUPPORT |ABOUT |CONTACT US,
Microsoft Office Professional Plus 2007
Copyright © 2008 Technologic Systems - All rights reserved
Home > Products > Peripherals
PC/104
Peripherals for Embedded Systems Custom Peripheral Designs System Integration
Our line of PC/104 peripherals boards offer maximum functionality at minimum cost. The PC/104 bus and connector allow you to easily add features to your single board computer by stacking feature specific daughter cards. Features that can be added through the PC/104 bus include wide-range wireless interfaces, multiple 10/100 ethernet ports, CAN bus, GSM and line modems, extra I/O lines, ADC channels, VGA video, Power-over-Ethernet, serial ports and more. If you don't find the exact features you need in our COTS peripheral product line,
Windows 7 Activation Key, consider a custom PC/104 peripheral design to suit your embedded application. Our team of engineers have the experience to modify existing products or design a completely custom peripheral board, often at a lower total cost than an in-house design. Contact an engineer for more information.
Plan your peripheral stack: All our peripherals use PC/104 stack-thru connectors. Some peripherals have a PC/104 bus with a 64 pin connector, some have a PC/104 bus with a 104 pin connector. If you are going to use 64 pin peripherals stacked with 104 pin peripherals, you will need to have an embedded computer with the 104 pin PC/104 bus. Stack the peripheral with 104 pins closest to the embedded PC, and stack the 64 pin peripherals above the 104 pin peripherals. The TS-12W power module can only be stacked on top. When purchasing peripherals,
Windows 7 Enterprise Key, check the pin count on each peripheral and plan your PC/104 stack.
FEATURES PC/104 bus Stackable cards Wide range of features Supports our ARM SBCs Supports our X86 SBCs Supports Third-Party SBCs DOS/Linux drivers Industrial grade design Available off-the-shelf SUPERIOR SUPPORT Manuals and schematics Open-source vision Public repository Power Supply and Memory - PC/104 Peripherals Boards and Daughter Cards TS-POE100 - 10/100 Ethernet with Power over Ethernet Splitter Power-over-Ethernet Splitter Integrated 10/100 Ethernet Port 2.4 amp @ 5V (12W) Wake-on-LAN integrated with PoE Programmable sleep modes Linux driver and utilities available TS-NVRAM2 - Non-volatile Memory Peripheral 1 MB or 2 MB Standard 5V power only True battery-backed SRAM Unlimited write cycles Fast 150nS read or write cycles 10 year lithium battery Write protection if power < 4.25 VDC TS-NVRAM - Non-volatile Memory Peripheral Up to 128KB battery-backed SRAM Eliminates wear-out failure Eliminates write cycle latency 10 year lithium battery Power Requirement < 1mA TS-12W - 5V Switching Power Supply Regulated +5 VDC via PC/104 bus Up to 2.4 Amps @ +5 VDC 10-40 VDC reverse polarity protection Designed for noise reduction/immunity High-efficient/Low-heat Switching Power Lockout circuit for VIN < 10 V TS-13W - 5V Low-Profile Power Supply Regulated +5 VDC via PC/104 bus Up to 2.6 Amps @ +5 VDC 8-30 VDC reverse polarity protection Designed for noise reduction/immunity High-efficient/Low-heat Switching Power Low-profile: 9mm height TS-BAT3 - Intelligent Battery Back-Up Guarantees controlled SBC shutdown NiMh rechargeable batteries 1000 mA-hour of 5V power Sleep mode w/ programmable wake-up Powers SBCs for days in low-duty cycle 5 VDC or unregulated 8-28 VDC power Linux drivers and utilities available TS-RF2-CF - Compact Flash Card Peripheral IDE Compact Flash socket Hot-Swapping supported Up to 4 TS-RF2-CF in a system Linux Drivers included Network Communication - PC/104 Peripherals Boards and Daughter Cards TS-MODEM2 - Multi-Modem PC/104 Peripheral Supports all MultiTech Modems Uses 16C550 UART w/ 16 byte FIFOs TS-MODEM - Line-Modem PC/104 Peripheral 33.6K v.34 modem Uses standard AT-style commands AutoDial and AutoAnswer features Uses 16C550 UART w/ 16 byte FIFOs NVRAM for storing user settings TS-GSM1 - GSM Cellular Modem Peripheral Standard 16C550 COM port interface Standard speeds, up to 115.2 Kbaud 230 Kbaud supported in x2 mode GSM SIM card socket TS-ETH10 - 10Mbit Ethernet PC/104 Adapter 10 Mbps CS8900 ethernet LEDS indicators for link and activity Header for external LED hookup DOS, Linux, NetBSD drivers available TS-ETH100 - 10/100 Ethernet Peripheral 10/100 Ethernet Port Jumper selectable I/O and IRQ PC/104 Dimensions 3.6 x 3.8 inches Wake-on-LAN Linux driver and utilities available TS-ETH2 - Dual 10/100 Ethernet Peripheral Two 10/100 Ethernet Ports Jumper selectable I/O and IRQ PC/104 Dimensions 3.6 x 3.8 inches LEDS indicators for link and activity RoHS compliant Wake-on-LAN Linux 2.4 and 2.6 drivers available TS-CAN1 - CAN Bus PC/104 Peripheral Philips SJA1000 CAN controller Opto-isolated CAN interface Up to 1 Mbps bit rate Linux Drivers included TS-IRIDIUM - PC/104 daughter board with Iridium Modem Standard PC/104 daughter board Standard 16C550 COM Port interface Jumper selectable as COM1 thru COM8 TS-RF2-AERO - Ultra Long Range Wireless Uses Aerocomm AC4790 transceiver Up to 4 mile range (line of sight) 902-928Mhz frequency band Up to 76.8kbps raw data rate 100mW transmit power (200mW EIRP) Linux Drivers included TS-RF2-ZIGBEE - Zigbee-Compatible Wireless Uses XBee Pro transceiver module - IEEE 802.15.4/Zigbee compliant Up to 1 mile range (line of sight) 2.4Ghz frequency band Up to 250kbps raw data rate 60mW transmit power (100mW EIRP) Linux Drivers included Optional Compact Flash socket Serial Communication - PC/104 Peripherals Boards and Daughter Cards TS-SER1 - Serial Port PC/104 Peripheral 1 PC/AT Serial COM Port 16550 UARTs w/ 16 byte FIFOs Up to 115.2Kbaud Power 20mA @ 5V TS-SER2 - Dual Serial Port Peripheral 2 PC/AT Serial Com Ports 1 PC/AT Parallel Port 16550 UARTs w/ 16 byte FIFOs Up to 115.2Kbaud (optionally 230Kbaud) RS232 drivers standard TS-SER4 - Quad Serial Port Peripheral 4 PC/AT Serial COM Ports 16550 UARTs w/ 16 byte FIFOs RS-232 available on all 4 ports RS-485/RS-422 available on 2 ports Up to 230 Kbaud TS-ISO485 - Dual UART with RS-485/RS-422 2 PC compatible 16550 UARTS Opto-isolated RS-485/RS422 drivers Full and half duplex operation Automatic RS-485 mode Isolation Voltage = 1500V Transient and Surge suppression Data Acquisition - PC/104 Peripherals Boards and Daughter Cards TS-ADC16 - PC/104 Peripheral for ADC,
Office 2007 Activation, DAC and Digital I/O 16 channels 16-bit ADC ADC Sampling rate up to 2x100ksps 512x16bit RAM-FIFO for ADC data 4 digital inputs - 0 to 5V 1 digital output - 0 to 3.3V/50mA 4 16-bit counters 4 12-bit DAC channels Jumper selectable I/O an IRQ Linux drivers available TS-ADC24 - 24 12-bit ADC Channels 24 channels 12-bit ADC Sampling rate up to 2msps Takes 4 samples simultaneously Internal 512x16bit RAM-FIFO Jumper selectable I/O and IRQ PC/104 Dimensions 3.6 x 3.8 inches RoHS compliant Linux drivers available TS-RELAY8 - Eight Software Controlled Relays Eight independent SPDT relays Software controlled 40mA draw per coil Jumper selectable I/O address Works with any PC/104 SBC TS-9700 - Analog Data Acquisition Board 8 channel 12-bit ADC 0.2% Analog Reference Optional 4 channel 12-bitDAC 8 separate jumper selectable I/O TS-DIO24 - 24 Digital Input/Output Board 24 Digital I/O points Opto-22 compatible interface 4 dedicated 48 mA outputs 4 dedicated 1 Amp outputs 16 programmable I/O points TS-DIO64 - 64 Digital Input/Output Board 32 Digital Inputs, 0-30V range 32 Digital Outputs, up to 40V 2.1V threshold for inputs 200/400 mA sink per output 34 Pin ribbon cables w/ locking Multi Functional - PC/104 Peripherals Boards and Daughter Cards TS-7KV - Multi-Function Video for ARM 16-bit color,
Windows 7 64bit, 640X480 resolution 8MB dedicated video memory @ 95Mhz Simple and fast video accelerator Accelerated Linux framebuffer driver 24 (16 out, 8 in) 5V tolerant GPIO 5 megabaud serial port Optional RS485, half or full-duplex Optional 8 channel 200ksps 16-bit ADC Optional SJA1000-CAN controller TS-9500 - VGA/Keyboard Adapter with Compact Flash Card Compact Flash socket Standard VGA video connector PS/2 keyboard connector PS/2 mouse connector TS-9600 - IDE Interface PC/104 Peripheral IDE Interface Dip-switch selectable IDE IRQ Dip-switch selectable Primary or Secondary IDE device Drive Activity LED Jumper selectable master/slave function Production - PC/104 Peripherals Boards and Daughter Cards TS-9420 - Production Tool for SBC Flash Image Replication TS-X86 and TS-ARM versions 8MB NOR Flash drive TS-ARM: uses RedBoot and Linux TS-X86: uses BIOS PC/104 8 bit bus TS-9422 - POST Code Display Board Software debugging tool Two 7-segment LEDs PC/104 8-bit bus Standard PC I/O address
Windows 7 Activation Key PC 104 Peripheral Boards
Hybrid Mode
