Office Pro Plus 2010 X64 Cisco AP, PEAP, MS Window
 

LinkBack Thread Tools Show Modes We now have configured a wireless network utilising PEAP (WPA & TKIP),Office Standard 2010 32bit, Cisco
1200 AP,Microsoft Office 2010 Serial, and Windows2003 IAS. 90% of the time this is working
perfectly however,Microsoft Office 2010 Professional Plus Key, users are getting kicked off the wireless network
and being forced to re-authenticate. The only indication of a problem
is the IAS server logs a authentication failure.
First you see
User xxx was granted access.
Fully-Qualified-User-Name = FQDN PATH
NAS-IP-Address = 10.x.x.x
NAS-Identifier = OURAP
Client-Friendly-Name = OURAP
Client-IP-Address = 10.x.x.x
Calling-Station-Identifier = Client MAC Address
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1983
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Authentication
Authentication-Type = PEAP
EAP-Type = Secured password (EAP-MSCHAP v2)
And the user is connected to the wireless network,Office Pro Plus 2010 X64, a little while
later
User xxx was denied access.
Fully-Qualified-User-Name = FQDN PATH
NAS-IP-Address = 10.x.x.x
NAS-Identifier = OURAP
Called-Station-Identifier = AP MAC
Calling-Station-Identifier = Client MAC
Client-Friendly-Name = OURAP
Client-IP-Address = 10.x.x.x
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 1988
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = Wireless Authentication
Authentication-Type = EAP
EAP-Type = <undetermined>
Reason-Code = 22
Reason = The client could not be authenticated because the
Extensible Authentication Protocol (EAP) Type cannot be processed by
the server.
Please help,Office Pro Plus 2010 X64, any clues would be much appreciated